Down you will find all releases ordered by type and version and some comments to it.
AMD K8 patches:These patches supports undervolting for AMD K8/K10 processors. K8 processors are more extensively supported, these include:
- AMD X2 processors
- AMD Turion64 processors
- AMD Turion X2 processors, except newer RM-* and ZM-* processors
- AMD Neo processors
These processors can not only be undervolted, but the driver also unlocks more frequencies to choose from and allows Black Edition processors to be overclocked. K10 processors are supported as well, although support is more basic, only undervolting is supported via the phc_vids interface.
0.4.4
Attachment:
File comment: PHC offtree package for AMD K8/K10 based processors
phc-k8_v0.4.4.tar.gz [23.96 KiB]
Downloaded 2475 times
Changes since 0.4.3:
- Merged changes for powernow-k8 from up to kernel version 2.6.38.
- Add initial AMD Family 10h and 11h support (Phenom and Turion X2).
- Add initial support for AMD Core Performance boost.
The automated DKMS build system can be used for this driver, just unpack this package and run "sudo make dkms_install". The module will be build automatically every time a new kernel version is installed. To uninstall, simply run "sudo make dkms_uninstall".
Or without DKMS, you can just run "make clean all && sudo make install" and do that every time you're running a new kernel version. For more detail, read the README file in the package.
Please support us by reporting any problems, improving the code or send some feedback
0.4.3 (older, I'm keeping this until every external link to it has been updated...)
Attachment:
File comment: PHC offtree package for AMD processors
phc-k8_v0.4.3.tar.gz [22.78 KiB]
Downloaded 1311 times
Changes since 0.4.2:
- Merged changes for powernow-k8 from up to kernel version 2.6.36.
- Minor fixes in dkms.conf, Makefile.
0.4.2 (for kernel versions before 2.6.28)
Attachment:
File comment: PHC DKMS package for AMD processors
phc-k8_v0.4.2.tar.gz [20.05 KiB]
Downloaded 2050 times
Changes since 0.4.1:
- Merged changes for powernow-k8 from up to 2.6.32, there's better support for the AMD Neo now.
- Fixed Makefile bug, where the make command would hang forever.
- Enhanced Makefile, with changes from LxP.
- Added support for kernel 2.6.24 (Ubuntu 8.04 LTS kernel version).
Changes since 0.4.0:
- Merged changes for powernow-k8 from 2.6.29 & 2.6.30, while trying to keep compatible with 2.6.27/2.6.28.
- Fixed a bug where an invalid, too high fid could cause the driver to stop working.
- Added support to override the maximum FID for Black Edition processors. Use "be_maxfid" to override (EXPERIMENTAL).
- Updated module maintainer, I missed that spot until recently...
phc-k8 v0.4.1 downloaded 626 times.
Previous versions downloaded 369 times.
INTEL patches:Those patches are tested with
Mobile Centrino,
Atom (N2xx),
Core/Core2 (T and P - Series)
CPU's
They may also be working for other or newer speedstepping Intel CPUs.
phc-intel-0.4 TESTRELEASE
Only use this if you are willing to take bugs, failure, system freezes and incompatibility to all current available scripts!
(Ok, I hope there are no failures and system freezes but keep that possibility in mind)
This release has the phc_vids and phc_default_vids interface known from
the stable releases as well as the new raw interface.
The raw interface dumps out the pstate as HEX value. There will be a
translation software (interface shim) soon to read/write those values
'human readable'.
Read the included README file!
Attachment:
File comment: TESTRELEASE - not yet meant for daily use
test-release-0.3.199-3.tar.bz2 [15.14 KiB]
Downloaded 3424 times
Include patches for Kernel 2.6.31
For Kernel version 2.6.33 and abovephc-intel-0.3.2-12-1 offtree
Attachment:
File comment: PHC offtree package for INTEL processors (Kernel 2.6.33 and above)
phc-intel-0.3.2-12-1.tar.bz2 [14.07 KiB]
Downloaded 9659 times
Using this package you can build a patched module outside the kernel tree.
(You do not need to patch your Kernel anymore)
Includes acpi-cpufreq.c from Kernel 2.6.33.3, 2.6.34.1 and linux-phc-0.3.2
Previous versions downloaded 507 times.
UPDATE (-12)
- updated Makefile - no need for "make prepare" anymore and some cleanups
- updated Documentation
- patchset for .34 contains acpi-cpufreq from 2.6.34.1
UPDATE (-11)
- added Support for Kernel 2.6.33 and 2.6.34
- changed Makefile to get the Kernel-Version from utsrelease.h
(Thanks to everyone trying to help with that)
For Kernel version 2.6.32 and belowphc-intel-0.3.2-10 offtree
Using this package you can build a patched module outside the kernel tree.
(You do not need to patch your Kernel anymore)
Attachment:
File comment: PHC offtree package for INTEL processors
phc-intel-0.3.2-10.tar.bz2 [20.2 KiB]
Downloaded 8631 times
Includes acpi-cpufreq.c from Kernel 2.6.27.21, 2.6.28, 2.6.29.1, 2.6.30, 2.6.31, 2.6.32 and linux-phc-0.3.2
Previous versions downloaded 6848 times.
UPDATE (-2)
Changed install routine to name the modprobe.d - file "phc-intel.conf".
Future releases of modprobe will need this.
UPDATE (-3)
Added patch-set for Kernel 2.6.29
Changed Makefile and added bash script to check if a patch is included for the current Kernel version and selecting the matching one.
Update (-4)
Support for more Kernel Versions (.27 and .30)
Update (-5)
Replaced 2.6.30 patch to match 2.6.30-rc3-git1
Update (-6)
Replaced 2.6.30-rc3 acpi-cpufreq.c with final release
Update (-7)
Added support for 2.6.31 (rc3-git3)
Update (-8)
Fixed missing "!" in prepare.sh (thanks to pakanek for telling me that)
Update (-9)
Added support for 2.6.32
Update (-10)
- removed
################################################
Single patches (for older Kernel Versions)
################################################
0.3.2Note: If you are using 0.3.1 for your Kernel it is not neccessary to update. Attachment:
File comment: PHC patch for INTEL processors - kernel 2.6.26
linux-phc-0.3.2-kernel-vanilla-2.6.26.patch.tar.gz [3.65 KiB]
Downloaded 4704 times
Tested with 2.6.27 - working correctly.
Should also work with 2.6.28-7 Vanilla (K_O-Gnom) (micols thanks for the info)
0.3.1
